| |
|
| Analysis of Fillet Welded Joint for Supporting Structure in Pipe Industries |
| Mr. Mulla Azhar S, Mr. Kulkarni P.D |
| Page No. : 638-641 |
Download  |
| |
|
| Design and Analysis of Welding Fixture for Cab Leg using FEA |
| Mr. C. A. Kubade, Dr. S. V. Patil, Mr. V. P. Patil |
| Page No. : 642-647 |
| Download |
| |
|
| Experimental, Analytical and FEM analysis of passive CLD, FLD and patched layer treatment to reduce vibrations with different viscoelastic materials |
| Pankaj R. Beldar, D.V.Kushare |
| Page No. : 648-653 |
| Download |
| |
|
| Experimental Investigation & Finite Element Analysis of NanoNotches Provided on Chip Surface |
| Miss Mitali Gore, Mr. Sachin Kulkarni, Mr. Prashant Karajagi |
| Page No. : 654-656 |
| Download |
| |
|
| Analysis of Automotive Exhaust Muffler Silencer Using FEA & Experiment |
| Mr. Sanchit Babarao Dhotre, Prof. S.L.Shinde |
| Page No. : 657-663 |
| Download |
| |
|
| Experimental Investigation & Finite Element Analysis of NanoNotches Provided on Chip Surface |
| Miss Mitali Gore, Mr. Sachin Kulkarni, Mr. Prashant Karajagi |
| Page No. : 654-656 |
| Download |
| |
|
| Analysis of Automotive Exhaust Muffler Silencer Using FEA & Experiment |
| Mr. Sanchit Babarao Dhotre |
| Page No. : 657-663 |
| Download |
| |
|
| Contact Stress Analysis & Stress Reduction of spur gear by using Analytical & Experimental Method |
| Tushar Narawade |
| Page No. : 664-669 |
| Download |
| |
|
| An Experimental Investigation & Analysis of Gear Component Manufactured By 3D Printing & Conventional Process |
| Preeti.R.Karmase |
| Page No. : 670-678 |
| Download |
| |
|
| Analysis of Loaded Structural Steel Members Under Thermal Loading |
| Bramhanand V |
| Page No. : 699-704 |
| Download |
| |
|
| Design and Analysis of Clutch Pre Damper to Reduce Neural Gear Rattle in Automotive Driveline |
| Tejaswini Kulkarni |
| Page No. : 723-728 |
| Download |
| |
|
| Design and Development Of Particle Damper For Rock Breaker Handle For Vibration Mitigation |
| Vikas L.Shinde |
| Page No. : 734-739 |
| Download |
| |
|
| FEM Based Crack Analysis of a Sensor Boss of Passenger Vehicles |
| Sandeep Ghadge |
| Page No. : 740-745 |
| Download |
| |
|
| An Investigative Study of Spur Gear Failure by FEA and Photoelastic Method |
| Ms:Vrushali Wable |
| Page No. : 746-751 |
| Download |
| |
|
| Finite Element Analysis to Calculate Bursting Pressure Using Ramberg-Osgood Model |
| Puneet DeoliaWable |
| Page No. : 752 -755 |
| Download |
| |
|
| Finite Element Analysis of Friction stir welded Aluminum Alloy AA6061for Different Tool Pin Profiles |
| S.K.Barik |
| Page No. : 756 -761 |
| Download |
| |
|
| A Comparative Study of Wave and Coil Spring Using FEM Approach |
| Mr. Siddhant R |
| Page No. : 762-767 |
| Download |
| |
|
| Design and Analysis of Rotary Kiln Tyre Rigging System Using FEA |
| Mr. Patil Rahul .R. |
| Page No. : 768 -775 |
| Download |
| |
|
| Stress Anlysis And Weight Reduction Of Roller Of Roller Conveyor |
| Mr. Vishwanath H. Patil |
| Page No. : 776-779 |
| Download |
| |
|
| ANALYSIS AND PERFORMANCE EVALUATION OF SERRATED MOULDED FRICTION LINING BAND IN BAND BRAKES |
| Vinay V. Patil |
| Page No. : 780 -784 |
| Download |
| |
|
| Process Optimization and Stress Analysis of Link Plate of Roller Chain |
| Sanil R. Patil |
| Page No. : 785 -788 |
| Download |
| |
|
| Weld Fatigue Stress Evaluation of Pressure Vessel Nozzle Joint with FEA & Experimental Approach |
| Ankush A. Wagawad |
| Page No. : 789 -793 |
| Download |
| |
|
| Optimal Design and FEA Analysis of Composite Drive Shaft |
| Satyajit S. Dhore |
| Page No. : 794 -800 |
| Download |
| |
|
| Contact Stress Analysis of Composite Spur Gear Using FEM and Hertz Theory |
| Harshal P. Rahate |
| Page No. : 801 -804 |
| Download |
| |
|
| Spring Back Analysis of High Strength Steels |
| Vasundhara Sutar |
| Page No. : 805 -809 |
| Download |
| |
|
| Design, Analysis, and Modeling of XY Flexure Stage |
| Mayur A. Bhosale |
| Page No. : 810-815 |
| Download |
| |
|
| FEA based Optimization of Die Design parameter on Thinning in deep drawing using DOE |
| Mr.Nitin Ramdas Jadhav |
| Page No. : 816 -821 |
| Download |
| |
|
| Seismic Analysis of Instrumentation Straight Type Manifold for Seismic Loading Conditions |
| Aditya M. Mashankar |
| Page No. : 822-825 |
| Download |
| |
|
| Design and Analysis of a Mechanical Component (Shaft) in the Alternator |
| M.D.Shrotriya |
| Page No. : 826-830 |
| Download |
| |
|
| Numerical Investigation for Wind Turbine Blade For Higher Reynolds Number For Darrieus Rotor |
| Parashar S. S. |
| Page No. : 831-837 |
| Download |
| |
|
| Design and Analysis of a Die for an Automotive Component |
| Nikhil S. Godse |
| Page No. : 838-841 |
| Download |
| |
|
| Experimental and Analytical Fracture Analysis of Thin Aluminum Sheet by J-inte ger and Crack Tip Opening Displacement (CTOD) method |
| A Rizwan Shaikh |
| Page No. : 842-846 |
| Download |
| |
|
| Experimental Stress Analysis and FEA Validation of chain link for 280 cc Drive |
| Priyanka Nandkumar Velhal |
| Page No. : 847-855 |
| Download |
| |
|
| Design and Experimental Analysis of Flight of Drag Chain Conveyor Belt with respect to its Breaking Strength by Varying Materials |
| Mr. Harishchndra A. Shire |
| Page No. : 856-863 |
| Download |
| |
|
| Structural Analysis of Visco Fan Insert for Automobile Engine Cooling System using Finite Element Method |
| Mr. Devdatta S. Chaudhari |
| Page No. : 864-877 |
| Download |
| |
|
| FEA and Experimental Analysis of Packaging Separator Clip for Palletization of Steel wheel |
| Prashant Pharande |
| Page No. : 878-882 |
| Download |
| |
|
| Analysis of Piston and Cylinder Assembly by Using FEM |
| Yogesh.B. Pawar |
| Page No. : 883-890 |
| Download |
| |
|
| Modeling, simulation and experimental validation for friction stir welding |
| Nishant A. Kamble |
| Page No. : 891-899 |
| Download |
| |
|
| Numerical and Experimental Studies on Thermal Performance of Split-Hexahedral Fins under Natural Convection |
| Kaustubh Pande |
| Page No. : 900-905 |
| Download |
| |
|
| Modeling, Simulation and Experimental validation of electrical discharge machining of EN24 Alloy Steel |
| Rohit Inamdar |
| Page No. : 906-911 |
| Download |
| |
|
| Selection of layout structure Geometry for Mini Milling machine by using Boolean-Algebra Method |
| Patil Manish S. |
| Page No. : 912-916 |
| Download |
| |
|
| Performance Analysis for 4-Cylinder Intake Manifold: An Experimental and Numerical Approach |
| Jason D’Mello |
| Page No. : 917-922 |
| Download |
| |
|
| FINITE ELEMENT ANALYSIS OF SPUR GEAR CRACK PROPAGATION FOR OPTIMAL WEIGHT TO LIFE RATIO |
| Mr. Shams Tawez |
| Page No. : 923-927 |
| Download |
| |
|
| Analytical Modeling and Self-tuned Fuzzy -PID Logic based Control of Quarter Car Suspension System |
| Amit A. Divekar |
| Page No. : 928-932 |
| Download |
| |
|
| Experimental and Numerical analysis of Metallic bellow for acoustic performance |
| Mr. B. R. Dhakad |
| Page No. : 938-944 |
| Download |
| |
|
| An Experimental and Numerical Investigation of Volute T ongue Clearance Variation on Performance of Centrifugal Blower |
| Nitin S. Jadhav |
| Page No. : 945-950 |
| Download |
| |
|
| Structural Analysis and Weight optimization of Blower Housing |
| Santosh B Madiwal |
| Page No. : 958-966 |
| Download |
| |
|
| Experimental Investigation of Optimum Tubes Profile Structure for Radiator Compactness |
| Vishal V. Kulkarni |
| Page No. : 967-974 |
| Download |
| |
|
| FEA and Optimization of Elevator Bucket |
| Swapnil P. Deokar |
| Page No. : 975-980 |
| Download |
| |
|
| Finite Element Analysis and Natural Frequency Optimization of Engine Mounting Bracket |
| Mallikarjun B Patil |
| Page No. : 981-989 |
| Download |
| |
|
| Machine faults diagnosis using Non-T raditional Optim ization Technique |
| Shweta G.Deshpande |
| Page No. : 995-1002 |
| Download |
| |
|
| Cockpit Parts Projection Optimization in Head Impact area as per ECE-R21 & IS 15223 Regulation . |
| Mr. Uday Thakare |
| Page No. : 1009-1013 |
| Download |
| |
|
| Design and optimization of IC Engine’s Exhaust Valve |
| Miss Snehal S. Gawale |
| Page No. : 1014-1021 |
| Download |
| |
|
| Optimization of Tribological Properties Using Grey Relational Analysis and Artificial Neural Network |
| K. R. Kenghe |
| Page No. : 1022-1028 |
| Download |
| |
|
| Analysis and Optimization of Front Axle Beam of Light Commercial Vehicles |
| Amol B. Chandankar |
| Page No. : 1029-1035 |
| Download |
| |
|
| Design Optimization of Camshaft for single cylinder Diesel Engine |
| Sudipta Pal |
| Page No. : 1036-1040 |
| Download |
| |
|
| Optimization and Fatigue Analysis of Steering Knuckle |
| Atul Yadav |
| Page No. : 1041-1045 |
| Download |
| |
|
| Design and Optimization of Propeller Shaft Made Up of Composite Material |
| Swapnil Shinde |
| Page No. : 1046-1053 |
| Download |
| |
|
| Optimization of a Two Wheeler Crankshaft Using Finite Element Analysis |
| Kishor Raskar |
| Page No. : 1054-1061 |
| Download |
| |
|
| Optimizing cutting parameters for minimizing surface roughness and improvement of tool life on ASTM A36 using taguchi method |
| Mr. AUTADE A. S. |
| Page No. : 1062-1068 |
| Download |
| |
|
| Analysis and Optimization of Gating System for TVS SATELITE |
| Ms. B. S. Shingate |
| Page No. : 1069-1075 |
| Download |
| |
|
| DESIGN AND OPTIMIZATION OF COIL SPRING USING NYLON 66 MATERIAL |
| Dhiraj G. Walhekar |
| Page No. : 1076-1080 |
| Download |
| |
|
| Optimization of Drilling Process Parameters of Injector Nozzle using Taguchi Method |
| Mr. Biswajit Karmakar |
| Page No. : 1081--1085 |
| Download |
| |
|
| Optimization of Addendum Modification for Bending Strength of Involute Spur Gear of Drilling Process Parameters of Injector Nozzle using Taguchi Method |
| Mr. Mujammil A. |
| Page No. : 1093--1097 |
| Download |
| |
|
| Weight Optimization of Rear Bumper Fog Lamp Punching Machine |
| Prasad D. Rewade |
| Page No. : 1098-1102 |
| Download |
| |
|
| Performance optimization of disc brake by Taguchi‟s method of Design of experiments |
| Vilas G. Pawar |
| Page No. : 1103-1108 |
| Download |
| |
|
| Optimization & Verification of Drive Shaft Parameters for Wind Mill |
| Mayuri U Waghmare |
| Page No. : 1123-1130 |
| Download |
| |
|
| Design, Analysis and optimization of crane structure via buckling analysis |
| Ashutosh Kumar |
| Page No. : 1131-1136 |
| Download |
| |
|
| Analysis & Optimization of Pressure Equipment Swing Check Valve by using FEA Methods |
| N. A. Kakulte |
| Page No. : 1137-1140 |
| Download |
| |
|
| “Design an d Analysis of flywheel for optimization” |
| Nitin Mohalkar |
| Page No. : 1141-1144 |
| Download |
| |
|
| Strength optimization and thermo-mechanical modeling of dissimilar weld joint |
| S. S. Konappanavar |
| Page No. : 1145-1149 |
| Download |
| |
|
| Design and Optimization of the Mounting System for a Low Horse Power (20 kVA) Genset |
| Kulkarni S S |
| Page No. : 1150-1153 |
| Download |
| |
|
| Experimental Investigation of Agitator to Optimize Performance & Cost |
| N.B.Jadhav |
| Page No. : 1154-1162 |
| Download |
| |
|
| Optimization of Process Parameter of Spot Welding by Multi Objective Taguchi |
| S.A.Jadhav |
| Page No. : 1163-1168 |
| Download |
| |
|
| Design and Optimization of Rail Wheel of Shuttle Head Assembly using Finite Element Analysis |
| Aniket Bindu |
| Page No. : 1169-1174 |
| Download |
| |
|
| Optimization of Excavator Boom with Ribs by FEA Analysis |
| Mr. Nilesh Panchal |
| Page No. : 1175-1180 |
| Download |
| |
|
| Optimization of Motor bike frame for single wheeled vehicle. |
| Rahul Pawar |
| Page No. : 1181-1184 |
| Download |
| |
|
| Optimization of Cutting Parameters in Turning Process to Enhance T ool life |
| Shrinivas D. Chilveri |
| Page No. : 1185-1189 |
| Download |
| |
|
| Performance Improvement of PV Module by Using an Exhaust Fan . (May 2016) |
| Nikhil P. Chonde |
| Page No. : 1190-1194 |
| Download |
| |
|
| Optimization of Thinning In Deep Drawing Process Using Ant- Lion Optimization Algorithm (May 2016) |
| Anuja S.Joshi |
| Page No. : 1195-1199 |
| Download |
| |
|
| New Product Development By Applying SIT Tools To Existing Products ENOVIA V5 and ENOVIA V6 And Its Application to Passenger Cars . (May 2016) |
| Vinit P. Mane |
| Page No. : 1200-1206 |
| Download |
| |
|
| Analysis & Optimizationof Jib Crane under Influenceof Various Slewing angles &load position by limit state method. |
| Deepak Desai |
| Page No. : 1207-1215 |
| Download |
| |
|
| Tribological Wear Behaviour of Journal Bearing on PEEK Composites . |
| Mr. Mahendra G |
| Page No. : 1225-1231 |
| Download |
| |
|
| Experimental Evaluation of Clutch Plate Material by Tribological Properties Using Trobometer |
| A. Mr. Dattatray B |
| Page No. : 1232-1239 |
| Download |
| |
|
| Analysis of Fatigue Life Improvement Using Composite Patch for Crack Arresting |
| Mr. Pravin P. Bhajbhuje |
| Page No. : 1240-1245 |
| Download |
| |
|
| Experimental Analysis of Tribological Properties of Lubricating Oil with Nanoparticles as an Additive |
| Mr. Shashikant. B. Dhokate |
| Page No. : 1246-1250 |
| Download |
| |
|
| Performance Investigation of Hydrodynamic Journal Bearing with Nano- additives in Lubricating Oil |
| Miss Rashmi R. Deshmukh |
| Page No. : 1251-1257 |
| Download |
| |
|
| Tribological Behaviour of PEEKComposite Materials Under Dry Sliding Condition |
| Aishwarya J. Unkule |
| Page No. : 1258-1266 |
| Download |
| |
|
| Investigation of the Tribological Properties of Journal Bearing under Wear Test |
| Sumeet A. Datar |
| Page No. : 1267-1275 |
| Download |
| |
|
| Vibration Analysis of Cracked Beam: A Comparative Study |
| Miss Priyanka P |
| Page No. : 1282-1288 |
| Download |
| |
|
| Review on study and analysis of Drum Brake to control Squeal Noise |
| Amit Phatak |
| Page No. : 1289-1295 |
| Download |
| |
|
| Analysis of damping of Sandwich Materials |
| Miss. Sneha R..Shinde |
| Page No. : 1296-1302 |
| Download |
| |
|
| Vibration analysis of a cracked cantilever beam using wavelet technique |
| Miss. Rupam S. Adsul |
| Page No. : 1303-1308 |
| Download |
| |
|
| Experimental Analysis of Boring Tool vibrations with Passive Damping using FFT Analyzer |
| Mr. Amol Y. Wadghule |
| Page No. : 1309-1314 |
| Download |
| |
|
| Fault Detection of Double Stage Helical Gearbox Using Vibration Analysis Techniques |
| D. A. Shinde |
| Page No. : 1315-1319 |
| Download |
| |
|
| Experimental Vibration Analysis of I.C. Engine by Using Biodiesel |
| Shital D. Patil |
| Page No. : 1320-1324 |
| Download |
| |
|
| Effectiveness and Predictability of Particle Damping on Cantilever Beam |
| P. P. Patil |
| Page No. : 1325-1329 |
| Download |
| |
|
| Crack Detection in Circular Shaft Using Vibration Monitoring Technique |
| O. D. Shingwekar |
| Page No. : 1330-1335 |
| Download |
| |
|
| Crack Detection of Cantilever Beam by Using Vibration Analysis Techniques |
| Ashish S. Apate |
| Page No. : 1336-1339 |
| Download |
| |
|
| Experimental Investigation To Study Effect of 6mm Sleeve Fix Pitch on Power Transmission & Vibration in Floating Bar Timer Belt Drive |
| Suryakant K Chaudhari |
| Page No. : 1340-1344 |
| Download |
| |
|
| Experimental Evaluation of Effect of Various Material Parameters on the Performance of Particle Impact Damper to Reduce Vibrations |
| Mr. Pravin H. Lokhande |
| Page No. : 1345-1351 |
| Download |
| |
|
| Design Development & Vibration Analysis of MCM300 Headlamp |
| Mr. Surajkumar Kharche |
| Page No. : 1352-1358 |
| Download |
| |
|
| Damping Evaluation of Conventional and Composite Plates using Different Structures |
| Sayali C. Kadbhane |
| Page No. : 1359-1370 |
| Download |
| |
|
| Modifying involute profile of gear to reduce noise and vibration |
| Mr. Jahir M. Khatib |
| Page No. : 1371-1375 |
| Download |
| |
|
| VIBRATION ANALYSIS OF CENTRIFUGAL BLOWER IMPELLER |
| Ms. Vidya A. Takale |
| Page No. : 1376-1383 |
| Download |
| |
|
| Vibration Analysis of Open End Wind Tunnel by Using Experimental and FEA Technique. |
| AnkurKanchan |
| Page No. : 1390-1395 |
| Download |
| |
|
| Vibration Analysis of Pelton Wheel Turbine by Theoretical, Numerical & Experimental Approach |
| Akshay D. Shinde |
| Page No. : 1396-1400 |
| Download |
| |
|
| Experimental Investigation of Fluid Viscosity Effects on Free Damped Vibration |
| Ananya Sarkar |
| Page No. : 1401-1405 |
| Download |
| |
|
| Experimental Investigation ofElectromechanical Relay under Mechanical Shock and Vibration |
| Priyal P. Pawar |
| Page No. : 1406- 1411 |
| Download |
| |
|
| FREE VIBRATION ANALYSIS OF PERFORATED PLATE |
| Mr.Ashish Rameshrao Selkar |
| Page No. : 1412-1420 |
| Download |
| |
|
| Optimization of Stiffeners of Differential Gearbox Casing by Vibration and Stress Analysis |
| Aditya K. Nimbalkar |
| Page No. : 1425-1430 |
| Download |
| |
|
| Experimental Study of ParallelMisalignment in Shaft Rotor System using Vibration Signature Analysis |
| S. P. Naik |
| Page No. : 1431 -1434 |
| Download |
| |
|
| Effect of Cut-out Shape on Free Vibration of Glass Fiber Epoxy Composite Plates |
| Yogesh G. Jadhav |
| Page No. : 1435- 1438 |
| Download |
| |
|
| Analysis of The Vibration Transmissibility Of Automobile Seat Subject To Vertical Excitations |
| Bhagyashri Nandkishor Nalavade |
| Page No. : 1439 - 1443 |
| Download |
| |
|
| Dynamic Analysis and Experimental Verification of Three-roll pyramidal configuration Roll Bending Process |
| Mr. Pramod R. Walunj |
| Page No. : 1444- 1448 |
| Download |
| |
|
| Investigation of Vibration Effect on Surface Roughness of PMMA Material |
| M.R.Dhakad |
| Page No. : 1449 - 1453 |
| Download |
| |
|
| Effect of Stress Relieving Features on Stresses of Asymmetric Spur Gear |
| Mr. G.B. Ingole |
| Page No. : 1454-1459 |
| Download |
| |
|
| Evaluation of Optimum Damping Ratio and Vibration Analysis of Mounting Bracket of Automotive Water Pump |
| R. R. Chougule |
| Page No. : 1460-1465 |
| Download |
| |
|
| Vibration Suppression of a Boring Tool by Particle Impact Damper (June2016) |
| T.A.Jadhav |
| Page No. : 1470-1475 |
| Download |
| |
|
| Numerical Simulation of Providing Y -Ring Against Classical Integrity To Reduce Stresses At Skirt-Head Junction |
| Prasad D. Dudhane |
| Page No. : 1476-1479 |
| Download |
| |
|
| Finite Element Analysis of linear compressor to achieve resonance condition |
| Paresh B. Shinde |
| Page No. : 1484-1488 |
| Download |
| |
|
| Analysis of Natural Frequencies and Mode Shapes of Metal Expansion Bellows for STHE |
| Mr.Vishnu Rajan |
| Page No. : 1489-1498 |
| Download |
| |
|
| Vibration Reduction of Top-Load Washing Machine Based on Suspension System |
| Churnika N. Narkhed |
| Page No. : 1499-1506 |
| Download |
| |
|
| Vibration Response Analysis Of Lower Control Arm And Its Maximum Deformation Under Different Mode Shapes |
| Sonal S. Jadhav |
| Page No. : 1507-1512 |
| Download |
| |
|
| Experimental Analysis of Faults in Worm Gearbox using Vibration Analysis |
| Sagar B Ghodake |
| Page No. : 1518 -1523 |
| Download |
| |
|
| Self Aligned Bearing Fault Detection Using vibration Signals Analyzed by Spectrum analysis. |
| Gaikwad Rajendra Dattatraya |
| Page No. : 1524-1530 |
| Download |
| |
|
| Dynamic Analysis of Crankcase and Crankshaft |
| Gouthami S. Tulasi |
| Page No. : 1531 -1541 |
| Download |
| |
|
| Analysis of Static and Dynamic Behavior of Variable Pitch Cylindrical Compression Springs in Comparison with Constant Pitch Cylindrical Compression Springs |
| Pravin Hare |
| Page No. : 1542-1548 |
| Download |
| |
|
| Design and Analysis of Active Piezoelectric Vibration Absorber |
| Akshay Rajput |
| Page No. : 1549-1554 |
| Download |
| |
|
| Vibrational and Tribological Analysis of Bearings with Experimental Method |
| Dhanyakumar S. Ghogare |
| Page No. : 1555-1559 |
| Download |
| |
|
| Vibration Response Mitigation in milling Machine using Tuned Mass Damper |
| S R Bodke |
| Page No. : 1560-1565 |
| Download |
| |
|
| Design of Medium Density fiber, Aluminium Composites Panel & Buckling Analysis |
| S. T. Lokhande |
| Page No. : 1566-1574 |
| Download |
| |
|
| Determination of proper Adhesive Thickness and Overlap length for SS304 |
| Gholap snehal s |
| Page No. : 1575-1580 |
| Download |
| |
|
| Effect of Lubricants on Friction and Wear behavior of Bronze filled PTFE |
| S. P. Thorat |
| Page No. : 1590-1593 |
| Download |
| |
|
| Cracks in steel casting for volute casing of a pump |
| Mr.kokate Shyam Arjun |
| Page No. : 1594-1601 |
| Download |
| |
|
| Experimental Investigation of Sliding Wear And Tensile Behavior Of Al27 Reinforced With SiCp And Graphite Hybrid Metal Matrix Composite |
| Prof S.B.Shejul |
| Page No. : 1602-1605 |
| Download |
| |
|
| Investigation of Wear & Friction Characteristics of Laminated Polymer Matrix Composite at Different Temperature |
| Mr. Sandeep. B. Udmale |
| Page No. : 1606- 1613 |
| Download |
| |
|
| Application of Sintered Steel for Reaction Cone used in Multi Cone Synchronizer System |
| Shrikant S. Bamane |
| Page No. : 1614-1619 |
| Download |
| |
|
| Effect of Hygrothermal Environment on the T ensile Properties of Banana Fiber Epoxy Composites |
| Paresh V. Sawai |
| Page No. : 1620-1625 |
| Download |
| |
|
| Characterization of Glass-Kevlar Hybrid Composite |
| Yash M. Kanitkar |
| Page No. : 1626-1632 |
| Download |
| |
|
| Influence of Joint Parameters on Adhesively Bonded Single Lap Joints in Hemp Fiber Composites |
| Rupesh Lokhande |
| Page No. : 1633-1637 |
| Download |
| |
|
| A Study of Moisture Diffusion Phenomenon in Jute-Epoxy Composite |
| Radhika Londhe |
| Page No. : 1638-1643 |
| Download |
| |
|
| Three Dimensional FE Modeling of Vicker Indentation Process for Black NiAl Coated Aluminum Substrate |
| Aparna G. Kadam |
| Page No. : 1655-1660 |
| Download |
| |
|
| Impact and Slurry Erosion Resistance of Composite Materials |
| S. A. Yalmar |
| Page No. : 1661-1667 |
| Download |
| |
|
| Design of an Automotive Exhaust System with Catalytic Converter and Method to Preparation there of |
| Yash Sudhirkumar Trivedi |
| Page No. : 1668-1672 |
| Download |
| |
|
| Effect of Fly Ash as Filler on Glass Fiber Reinforced Epoxy Composites |
| Vijay D. Karande |
| Page No. : 1673-1677 |
| Download |
| |
|
| A study of the effect of various process parameters on mechanical properties of Friction Stir Processed AA6061-T6 aluminum alloy |
| Chetan S. Patil |
| Page No. : 1678-1684 |
| Download |
| |
|
| ANALYSIS OF FATIGUE CRACK GROWTH RATE AND SERVICE LIFE OF SPUR GEAR |
| Bhargav desai |
| Page No. : 1685-1689 |
| Download |
| |
|
| nfluence of Shoulder geometry of tool on friction stir welded joint of aluminium alloy 6082 T6 |
| S.A.Thorat |
| Page No. : 1690-1698 |
| Download |
| |
|
| Evaluation of Mechanical, Tribological and Micros tructural properties of coatings on non -nitrided and nitrided AISI4140 |
| Sadaphal G. B |
| Page No. : 1699-1705 |
| Download |
| |
|
| Mechanical and Tribological Analysis of Nitrided AISI 4140 Steel With Coatings |
| Nilesh.M.Wakte |
| Page No. : 1706-1712 |
| Download |
| |
|
| “The Investigation of new carbon epoxy composite material to replace at applications of costly, heavy & rustable steel at tensile loadings.” |
| Mr. Yogesh Dinkar Jadhav |
| Page No. : 1713- 1719 |
| Download |
| |
|
| “Evaluation of Mechanical properties of Aluminium composite (Si & Gr)material” |
| Chetan M. Mane |
| Page No. : 1720-1723 |
| Download |
| |
|
| FABRICATION OF Ti-CNT COMPOSITES THROUGH POWDER METALLURGY |
| P.S. Kulkarni |
| Page No. : 1724-1726 |
| Download |
| |
|
| Experimental and Numerical Analysis of Woven Carbon/Epoxy Composite Plate |
| Dhanashri K. Dhumal |
| Page No. : 1727-1732 |
| Download |
| |
|
| “Numerical and experimental investigation of processing parameters of friction stir processing on engineering materials” |
| Nikhil M. Lonkar |
| Page No. : 1733-1736 |
| Download |
| |
|
| Effect of shot Peening on surface characteristics of Austenitic Stainless steel (AISI 304) and Numerical Validation |
| Prasad A. Bejgamwar |
| Page No. : 1737-1740 |
| Download |
| |
|
| A Study on Slurry Erosion Wear Behaviour of HVOF Sprayed WC-CO Coating |
| Vishal. V. Jadhav |
| Page No. : 1741-1746 |
| Download |
| |
|
| Enhancement in Mechanical Properties of Polyphenelene Sulphide (PPS) Composite with Filler Material Glass Fiber and Carbon Fibe |
| Ms.Snehal R. Walzade |
| Page No. : 1751-1756 |
| Download |
| |
|
| Slurry Erosion Wear Characteristics of Pump Material Installed in Tapi River Basin of North Maharashtra Region |
| Mr. Sagar. R. Patil |
| Page No. : 1757-1762 |
| Download |
| |
|
| STUDY ON MECHANICAL BEHAVIOUR OF Mg-CNT COMPOSITE MATERIAL FABRICATED BY STIR CASTING |
| S. L. Waranghuse |
| Page No. : 1763-1769 |
| Download |
| |
|
| An Experimental Study on Effect of Wear Properties of Aluminium Composite Reinforced With Silicon Carbide and graphide |
| Amol k adam |
| Page No. : 1772-1776 |
| Download |
| |
|
| Experimental Modal Analysis of Double Lap Adhesive Joint for Aluminum Plates |
| Mr.Khapare S.A |
| Page No. : 1777-1784 |
| Download |
| |
|
| Experimental Analysis of Self Piercing Riveted Joint for Cold Rolled Steel and Aluminium Sheets |
| Shrikant U. Nagare |
| Page No. : 1785-1793 |
| Download |
| |
|
| Develop and Investigate the Mechanical Properties of Natural Fiber Reinforced Polymer Composites |
| Pramod B. Lokare |
| Page No. : 1794-1799 |
| Download |
| |
|
| Fabrication of Mg alloy -CNT Nanocomposite for Automobile Wheel Rim Applications |
| Gane sh Raje ndra Jamgaonkar |
| Page No. : 1800- 1809 |
| Download |
| |
|
| Tribological Investigation of Ferodo Lining Material Embedded with Copper and SiC particles For Clutch plate |
| Miss Kaveri. S. Kadam |
| Page No. : 1810-1816 |
| Download |
| |
|
| Wear Rate Investigation of Aluminium Based Silicon Carbide Metal Matrix Composite Embedded with Copper |
| Mr. A. R. Dhatrak |
| Page No. : 1817-1823 |
| Download |
| |
|
| Investigative Comparison of Jute-Polypropylene and Wood flour-Polypropylene Composites |
| Mr. G.V. Mahajan |
| Page No. : 1824-1828 |
| Download |
| |
|
| Study of Mechanical Behavior of Banana fiber and Glass fiber polyester reinforced composite |
| Renuka Patel |
| Page No. : 1829-1832 |
| Download |
| |
|
| Design and Development of High Speed Spin Test Rig Facility for Rotating Systems |
| Ashish Pawar |
| Page No. : 1833-1840 |
| Download |
| |
|
| WEIGHT OPTIMIZATION OF ELECTROSTATIC PRECIPITATOR (ESP) USING FEA APPROACH |
| Saurabh K. Chaudhari |
| Page No. : 1841-1848 |
| Download |
| |
|
| Study and Analysis of PVD Coating on Piercing Punches to Improve Its Life |
| Gaurav M. Bhavar |
| Page No. : 1849-1854 |
| Download |
| |
|
| Design of Biodiesel Plant using Transesterification process for Non-edible oil seeds |
| Vikrant D. Nichit |
| Page No. : 1855-1861 |
| Download |
| |
|
| Defect Analysis of plastic Utility Bin by using Mold Flow Analysis . |
| Mr. Hariom Thakare |
| Page No. : 1862-1867 |
| Download |
| |
|
| Experimental Evaluation of Effect of Humidity and Temperature on the Tensile Strength of Adhesively Bonded Banana-Epoxy Composite Joint. |
| Asma Parkar |
| Page No. : 1868-1875 |
| Download |
| |
|
| Influence of Welding Process Parameter on Tensile Properties of Butt Welded IS2062 E-250 Steel Plate Using Design of Experiment Approach |
| Sanjay A. Swami |
| Page No. : 1876-1880 |
| Download |
| |
|
| Experimental Evaluation of Semi-Active Particle-Based Damping Systems Controlled By Magnetic Field |
| Chaitali S. Mahajan |
| Page No. : 1881-1887 |
| Download |
| |
|
| Experimental Analysis and Modelling of Residual Stresses in AISI 304 Shaft During Turning under Dry and Wet Environment |
| Pradip R. Thorat |
| Page No. : 1888-1894 |
| Download |
| |
|
| Crashworthiness Evaluation of Low Weight Recyclable Intrusion Beam for Side Impact |
| Avinash P. Pawar |
| Page No. : 1894-1898 |
| Download |
| |
|
| Automation of Warehouse Spraying System |
| Shrikant B. Girigosavi |
| Page No. : 1899-1903 |
| Download |
| |
|
| Study of Torque Response during Engagement of Wet Friction Clutch |
| Mansoor Nasir Shaikh |
| Page No. : 1904-1909 |
| Download |
| |
|
| Performance Evaluation of Resonating Chamber Exhaust Silencer With Twin Chamber Inline VOC Emission Filter |
| Ms. Pooja Lokhande |
| Page No. : 1910-1918 |
| Download |
| |
|
| Smart Home Control by using Raspberry Pi & Arduino UNO |
| Hamid Hussain Hadwan |
| Page No. : 1919 - 1925 |
| Download |
| |
|
| Analyze Performance of V -cone Meter by Experimentally and Theoretically |
| Shailesh Patil |
| Page No. : 1926-1929 |
| Download |
| |
|
| Noise Reduction of Centrifugal Blower Using Particle Damping |
| Anand K. Mali |
| Page No. : 1930-1932 |
| Download |
| |
|
| Transmission Losses in Simple Expansion Chamber of Reactive Muffler Analysis by Numerical & Experimental Method |
| Y.B. Zalte |
| Page No. : 1933-1939 |
| Download |
| |
|
| BMD Related Torsional Strength of Human Femur Bone |
| Shrikant A. Borkar |
| Page No. : 1940-1949 |
| Download |
| |
|
| An Investigation on effect of change in material of gear pair used in rear wiper mechanism of vehicles |
| Mr.Nilesh A. More |
| Page No. : 1950-1954 |
| Download |
| |
|
| Experimental and Numerical Analysis of Trapezoidal Corrugated Web Beam to Determine its Strength and Mode Shapes |
| Mr. Nimbalkar Amol N. |
| Page No. : 1955-1961 |
| Download |
| |
|
| Design, Manufacturing and Analysis of Crimping Machine Tool for a Hose Pipe in Cooling Assembly |
| Mr. Abhishek I. Thorat |
| Page No. : 1962-1965 |
| Download |
| |
|
| Effect of Texturing Patterns on Friction and Wear behavior of Glass Fiber filled Polyamide (PA66) |
| Navale R.A. |
| Page No. : 1966 -1971 |
| Download |
| |
|
| Critical Speed Improvement in Single Cylinder Engine Valve Train |
| Sagar A. Gade |
| Page No. : 1972-1976 |
| Download |
| |
|
| Topology optimization of steering knuckle arm using finite element method |
| Ms. Kalyani Bhimrao Bhagwat |
| Page No. : 1977-1990 |
| Download |
| |
|
| Performance Analysis of Steel Leaf Spring With Crack |
| Mr. Amit Gatfane |
| Page No. : 1991-1997 |
| Download |
| |
|
| Analysis of Composite Journal Bearing |
| G. R. Jadhav |
| Page No. : 1998-2002 |
| Download |
| |
|
| Development of Test rig for Analysis of Helical Compression Spring |
| Mr. Vishal B. Gavali |
| Page No. : 2003-2008 |
| Download |
| |
|
| Optimum Design of Damped Dynamic Vibration Absorber – A Simulation Approach |
| A. Z. Pachpute |
| Page No. : 2009-2011 |
| Download |
| |
|
| IMPROVEMENT OF BENDING LOAD CARRYING CAPACITY OF THE SPUR GEAR BYUSING ASYMMETRIC TOOTH PROFILE |
| Mr.Dekhane Akshay Govardhan |
| Page No. : 2012-2018 |
| Download |
| |
|
| A COMPARATIVE EVALUATION OF SPRING RATE OF CYLINDERICAL AND CONICAL HELICAL COMPRESSION SPRING MADE OF ASTM A227 MATERIAL |
| Amitesh PG student |
| Page No. : 2025-2029 |
| Download |
| |
|
| Design and Optimization of Piston for Two Wheeler Disc Brake Master Cylinder using Plastic Material |
| Sourabh M. Dhole |
| Page No. : 2030-2037 |
| Download |
| |
|
| Home Automation Using Wi-Fi and Security System |
| Anup Dongre |
| Page No. : 2043-2046 |
| Download |
| |
|
| Safety Mechatronics System for Farming of Fruits and Vegetables |
| Vrushabh Durugkar |
| Page No. : 2047-2052 |
| Download |
| |
|
| The Android Application based Wheel-chair for Handicapped |
| Rohit Khot |
| Page No. : 2053-2057 |
| Download |
| |
|
| Design and Fabrication of PLC Based Conveyor System |
| Manoj Madhav Nehete |
| Page No. : 2058-2063 |
| Download |
| |
|
| Controlling Strategies to Reduce Torque Ripple in Switched Reluctance Motor in Series Hybrid Electric Vehicle |
| AmolPhadtare |
| Page No. : 2064- 2072 |
| Download |
| |
|
| Condition Monitoring Technique to Investigate Gear Fault with Artificially Induced Gear Crack by using Vibration Analysis |
| S. N. Gawali |
| Page No. : 2073- 2078 |
| Download |
| |
|
| Analysis Led Design of Actuator Bracket with the Effect of Pretension, Actuation Force and Coefficient of friction |
| Ms. Yogita Arun Wable |
| Page No. : 2079-2084 |
| Download |
| |
|
| A Neural Network Tool Based Model for Optimization of Surface Roughness of Hard Turning Process |
| Pramod B. Chavan |
| Page No. : 2089-2093 |
| Download |
